Initial Turboprop Training
Example Exam Questions

Actual exam has a total of 50 questions

1. To prevent propeller over speed in the event of a primary governor failure, the following backup system will control propeller RPM:
A Beta Valve and reversing lever
B Over speed governor and Beta valve
C Over speed governor and the fuel topping governor
D Fuel topping governor and the reduction gear box

2. The Auto Ignition system prevents loss of combustion (flame out). With the system armed, the glow plugs or igniter will be activated if the engine torque falls below:
A 90% N1
B 200 FT/LBS of Torque
C 400 FT/LBS of Torque
D System powers glow plugs at all times

3. The fire detection system sensors are activated by:
A Heat
B Ultraviolet radiation
C Infrared radiation
D fire

4. The compressor bleed air valve is used to:
A Vent excess compressor air at low engine speeds
B Vent excess compressor air at high engine speeds
C Vents P3 air out of the diffuser
D Vents P3 air out of the compressor section

5. The maximum fuel capacity for your aircraft is:
  _______ gal. total and ______ gal. usable

Initial Training - Turboprop
5 Day: Ground Training Flight Training

ATM Home Page

Vero Beach Business Site by VDS Vero Beach CrossRoads Inet VDS Copyright